1999 GMC Sonoma "pulled handbrake hard" Questions

...handbrake lever.. spray wd40 on the cable where it enters the sheath and work it on and off.. also check the cables where they are located near the back wheels and spray these also.. they rust up and ...

on the handbrake and then push the release button. The button can only be released while the lever is being pulled up so pull hard. This will release it the lock for you to bring the brake handle down

holden rodeo 1998 ,handbrake will not turn to release(under dash type) just thought i would ask ,if you put your foot hard on brake pedal then pull/turn the handbrake lever......

...stuck on my 94 trans am i tried playing with the lever but nothing should i drive it to see if release's it by itself... i put your foot hard down on the footbrake,then try to pull/ turn handbrake ...

handbrake up to hard the rear right locks and doesnt release. You've got to replace your rear calipers. I say "calipers" because one is hanging up but they should be changed as pairs. Thanks, Dana P.S

...Handbrake doesn't hold/work on my 2003VY Holden Commodore Sounds like the cable is broken. Pull the hand brake on as hard as you can and hold it on then try to move your car, if the car moves ...

...handbrake is stuck on how do i fix it You may have to pull up really hard to be able to release it,  if it was applied really hard,  if not and it's an automatic transmission you may ...

...handbrake pulling arm and make sure it right the way back onto the shoe .Next the hard part and this is adjusting the the automatic adjuster till as you put drum on their is a slight resistance ...

...HARD AS IT WILL CAUSE FRACTURES. I hope that has been of some help to you. If you have a normal handbrake, you can remove some screws around the handbrake covering. The screws are sometimes well ...

I cannot unlock the emergency brake on my car I locked the handbrake but i might have pulled the lever too hard and now it won't release. Please help. CE MODEL AUTO ?