...replacing. On some models you can replace the "pulse board". On some you must replace the wiper control module which mounts directly to the windshield wiper motor. This is a very common GM
...replace my wiper unit . how do you remove it ,just the motor and the shell, the circuit board is ok You have to remove the wiper arms then the cowling. Remove the retaining nut that holds the arms to ...
...wiper motor was replaced. The wiper drive shafts are keyed NOT just splined. How do I time them. When you turn them on, they go down first then up. Driving me crazy. Put the wipers down near the ...
wipers work on high only with a new wiper motor just replaced motor on windshield wipers and they only work on high, not low or intermitant Try checking the wiper switch
...the windshield wipers on a 1996 GMC truck. I replaced the wiper motor and the wipers will not lay at the bottom of the windshield I just take the arm off and reposition the arm in the splined
...whenever I turn on the switch. Replaced wiper/cruise control arm. Fuse blew. Disconnected wiring harness from wiper motor and turned on switch. Fuse still blew. You have a short in the wiper ...
Question about GMC Sierra
...wiper motor but that was not the problem. did you try to direct your new motor to the battery only?....if you direct its fast that means your rod to the wiper are rusty or dirty try to spray some oil ...
1989 GMC wiper switch being matched to a 1964 Chevy PU wiper motor, need schematic. replace the wiper module
...wiper motor on the fire wall there is ablack plastic cover over the motor remove that and you will see a chip board that is replacable its usually around $20 or so, which is cheap way to find out if ...
...to replace. Locate the wiper motor and on it is a black plastic cover held on by 3 or 4 torx headed screws. Unplug it, remove the screws and cover and then you can remove the module and replace
951 questions posted
Usually answered in minutes!
987 Questions
847 Questions
676 Questions
601 Questions
457 Questions