1992 GMC Sonoma "remove ignition" Questions

ignition switch on 1992 gmc sonoma Remove the kick panel covers, the lower portion of the dash, remove the lower half of the covers on the steering column. You will have to cut about 3 or 4 wire ties.

...ignition switch? You have to remove the stering colum covers and in the ingnition key drum on the side there is a little hole, press the inside pin and pull the key ccylinder out, you can buy on ...

can try using a very small paper clip or the like and try to pry it out or you'll have to remove the ignition switch. a haynes auto repair manual at any auto parts store for 17$ will explain in detail

Where is the electronic ignition module located in a 1992 GMC Sonoma 2.5L 4 cylinder engine? Sits in the ignition distributor, remove cap and two small bolts that hold it in place.

...digital gear selector doesnt show movement when put in nuetral. when ignition is off with the key removed the fuel and temp guages move to half way position. it is a 4.3ltr 2wd automatic driveline. ...

...remove battery? GMC Sonoma1998 turn off radio and all accessories and vehicle off no key in ignition-- open hood and battery is mounted passenger side front loosen positive red covered connection ...

Remove cable from ignition and positive cable coming from battery. Crawl under the passengerside near the front wheel remove two bolts on the starter. pull starter out from wheel well. Installation is

...ignition switch. I see two ways of doing it - one is to remove the steering wheel and the other is to pull the shroud from the column. They can't both be correct. Which way? Are there any ...

I have a 1991 GMC Sonoma. How do I get the old ignition coil out? It is loose and I believe causing problems. remove the distributer cap first.