2004 Ford Mustang "iac motor" Questions

Ad

Question about Ford Mustang

1 Answer

...mustang GT, when I start it in the morning it revs up then down then konks out,could it be a choke sensor? no, its probally either a fuel pressure regulator or the IAC motor IAC... idle air

Ad

Question about Ford Mustang

1 Answer

...iac motor ( idle air contol) or replace it it sits right on the side ot throttle body about 4' long round with a 2 wire plug going in the end of it and has 2 8mm or 10 mm bolts holding it on take it ...

Ad

...has come up again. try to keep it running by keeping your foot on the gas if this works its a bad IAC ...

Question about Ford Mustang

2 Answers

...iac) motor its the controller for the air in the intake at start up.usually on top near the plenum...meets the air tube.two bolts and a two wire plug try removing and cleaning it with carb clean ...

...IAC few weeks ago, has had head gasket and air intake replaced, if that makes a difference. I am not a backyard mechanic but will have my mechanic check trans fluid Monday. Check for a possible cold ...

...be your iac valve sticking. you can pull it off and clean with carb cleaner. it will be bolted on air intake close to throttle plate two 8mm bolts it will have a little motor housing coming out of

...IAC ( idle air control ) motor not working properly Definitely do what Paul said first. But if the problem gets worse over time(like it only takes an hour to shut down) Start looking at the catalytic ...

...IAC Solenoid Fuel Injector Automatic Transmission Camshaft Position Sensor (3.8L) MAF Sensor F 40 Amp Orange Heated Back Window G 20 Amp Yellow Fuel Pump H 60 Amp Blue Fan Control J ? ? Not Used K 10 ...

Question about Ford Mustang

12 Answers

motor (IAC). Replacing it should fix your stalling. These issues if fixed your car's performance should improve. Thanks for contacting Fixya If you dont have enough fuel pressure. Sounds like it could

Question about Ford Mustang

3 Answers

...IAC) motor is located on the side of the throttle body. Disconnect electrical connector from IAC motor. Remove two mounting bolts (screws). Remove IAC motor from throttle body. Fig. To install: ...

Not finding what you are looking for?
2004 Ford Mustang Logo

438 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Ford Mustang
1998 Ford Mustang

706 Questions

2000 Ford Mustang
2000 Ford Mustang

694 Questions

2001 Ford Mustang
2001 Ford Mustang

653 Questions

1995 Ford Mustang
1995 Ford Mustang

589 Questions

2002 Ford Mustang
2002 Ford Mustang

617 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...