...Blend door/Blend door motor Dirty EVAP coilHere's a pic of what the Blend door/Motor look like and instructions on how to replace it. Wish you the best of luck. Removal & Installation Release the ...
blend door. The manual I'm looking at indicates your blend door is cable actuated. Maybe the cable sheath is loose such that the cable is not moving the door. See if you can access one or both ends of
Question about Ford F-250
...Question edited for clarity, maker. Question moved to sub category. More likely to be the Blend Door Actuators https://www.google.com/search?q=1989+ford+f250+heater+blend+door+actuator+location
...or control. Check the blend door actuator (behind the glove box), and then the blend door itself as it may be broken (its plastic) and not closing off the cold air. thermostat seems to be stuck ...
Question about Ford F-250
...blend door will by-pass the heater core which is controlled by a hot/cold knob or digital temp cotrol on the dash. Now back to the cold air problem- assuming the basics are all ok- Coolant is full, ...
...regardless of selection. A/C, Heater and Fan Speed all work. Is there an easy fix for this? blend door is broke or the motor that controls the door is malfunctioning. easy fix but not fun to get
...Blend Door Issues 93 F250 - Looking for help troubleshooting a problem with the Vacuum controlled blend door system. With the A/C on, step on the gas enough to lose vacuum and the air blows out the ...
...blend door and it's under the dash behind the glove box. If you did not pull a vacuum before charging the system it will not get cold. Air in the system reduces the operating pressure and the ...
A/C blows hot air what truck? check blend door check refridgerant?
Premium right up your alley http://www.fixya.com/cars/t1498841-ford_f_250_c_blows_hot_air I suspect the guy left the little connector off the air temp blend door motor.
1,473 questions posted
Usually answered in minutes!
705 Questions
546 Questions
442 Questions
465 Questions
399 Questions