...torque converter housing. When I rebuilt the transmission I asked them to fix the rear main seal, thinking this was the problem. They informed me it was not the rear seal but in fact was leaking from ...
Torque spec./ 89chevy van g30 v8 350 5.7/ valve cover 7 FT/LBS AssUmes cork. not after market gaskets that the states different. of cork is over torqued, it warps and leaks or cracks or the thing ...
Question about Ford F-350
...rings 10 mmiles for cast rings .let engine cool down retorque headbolts,replace valve covers .run it and get on it!!! good luck hve fun. hi The torque settings for the mains are 60 - 65 foot pounds ...
...torque convertor. You have to get new gaskets like head gasket, valve cover gasket, water pump gasket. You'll need an alternator, if it has a/c you'll need an a/c compressor; you'll need a serpentine ...
...to reset valve/rocker, torque values. Gasket set, change oil because there will be water in it. Better have a friend who has tried this before too. Can be done but it's tough to do the first
...valve Torque to: 30 ft. lbs. (41 Nm) Apply a 1/8 in. (2-3mm) wide to 1/16 in. (0.5-1.5mm) high bead of sealant to the front cover sealing surfaces to the engine block and oil pan. Install or connect ...
...torque converter, a loose valve body or a blown out valve body gasket, the forward or direct clutch pack has lost line pressure to the clutch pack (could be a plugged up transmission filter) or the ...
...valve.Don't know if the newer cars have them or if they can be changed it's worth asking about it. If your problem seems to be intermittent, you can't predict when it will happen, could be the torque ...
568 questions posted
Usually answered in minutes!
448 Questions
438 Questions
414 Questions
311 Questions
293 Questions