2000 Ford Focus "wiper arm removal" Questions

wiper arm removal I have a 2000 Ford Focus SE Wagon and I am trying to remove the wiper arms off of the wiper pivot. Is there a special tool needed? Is their a simple method? loosen the nut on the ...

...not is this abig problem the wiper motor arm might be the problem check for the rear wiper arm or rear wiper trans arm link. will have to remove the backing in door in order to change it. good ...

The windshield wipers to my Ford focus stopped working today. They worked for a little while & then stopped in the up position. You can hear the motor working but they don't move. You can move

...wiper arm. There is a plastic cap you remove and under it is a nut, and if it's loose, you need to get the wiper motor to park...by turning on the wipers, and then off and wait untill it sounds like ...

...wiper arm L&R using the corresponding spanner.open the cowl plastic cover by removing the screws along the sides.upon removing the cover you can access the wiper motor and linkages.disconnect the ...

...wiper mechanism is binding, causing the motor to over amp and blow the fuse. Try lubricating, if you get to it, the arm mechanism, and make sure it is not hitting anything while it is in motoion. Not ...

the windshield wipers on my 2006 ford focus just stopped working. When i hit the switch I can hear the motor running but wipers do not move. I think the linkage is damaged but when I went to take ...

...SEAL LEAKING.THE LOWER COWL HAS TO BE REMOVED TO CLEAN DRAIN HOLES OUT.YOU HAVE TO REMOVE WIPER BLADES ARMS TO REMOVE LOWER

...Wiper Arm & Blade Removal & Installation Front To Remove: CAUTION When the wipers are parked (off), the driver?s wiper arm must be above the passenger?s wiper arm. Remove the clip holding the ...

...wiper arm on a 1997 suburban, it hits the side of the window. Wiper Arm & Blade (Front) Removal & Installation Wiper Blade To Remove: Turn ignition switch to ACCY position. Turn wiper switch ...