2000 Volkswagen Beetle "remove vw heads" Questions

vw beetle glx There is no easy way or a hard way to remove the cylinder head, only one way and that's removing everything that's attached to it. Use the head alignment tool when installing back on top

...vw beetle 1998 do i need to remove front bumper and lay down the rad on my 1998 vw beetle to get at the alternator We have a 2000 Beetle. You have to remove 4 allan head bolts and remove the throttle ...

...to remove head light in a 2006 VW Beetle getting the headlight out to change the bulb in a 2006 VW Beetle. go here ...

vw beetle that is leaking oil out the exhaust and LH head area, do i have to drop motor? No. Check if it is the head gasket or simply the rocker cover gasket that is leaking. The cylinder heads can be

...gasket, or cracked head. This is a major repair job, because the entire top of the engine has to be removed to do the repair. You can't see the leak because it's inside the engine, not outside of it. ...

...VW ...Nbr 1/2 cylinders are not firing but get spark. generator appears to be dead. What might the problem be? The 1600cc Motors were prone to developing cracks in the heads between the inlet and ...

? Under the hood, on top of the engine where the wires head into the engine block. The wires can be removed a,d the glow plugs can be extracted. Just follow the cables

remove the head bolts from a 2001 vw bettle with the 2.0L but there not a torx even though thats what they look like, need to know what the socket is called so i can buy it It is a "triple square XZN"

...vw beetle 2.0litre camshft pulley lines up with notch on head at approx 11o'clock crankshaft pulley marks at 12 o'clock also crnkshaft marks at flywheel end remove plug on top of bell housing and ...

VW beetle overheats, removed thermostat and bypassed fan, still overheats. two possible problems . air bubble in the system or you breached a head gasget .