1993 Mazda Protege "plug wires" Questions

How do i plug in the spark plug coils? what order? How do i plug in the spark plug coils on a 2000 Mazda Protege? what order? i replaced the spark plugs and coils but now its misfireing worse. If it's

...plug you would be wrong... so: Look right on top of the aluminum engine block and you will see the word Mazda and behind that you'll see your engine size. Between the two you'll see a round black ...

...to get the signal from? Thanks! some tachs can take the signal from one of the spark plug wires; you just thread the wire into the bood with the plug, or into the other end of the spark plug

plug wires - test ohms resistance of the spark plug wires with a multi meter (5 bucks at harbor freight) -- or simply replace the spark plug wires.How was it you tested the coil and spark at the plugs

car runs bad after replacing spark plugs and wires i replaced my spark plugs and wires and now the runs rough and backfires. I made sure they are all getting spark. i marked the wires as i replaced ...

...plug wires then remove one at the spark plug end then connect a new spark plug to the wire lay it on the engine so it can ground and crank the engine to see if there is spark at the plug. The way to ...

lighter plug wont work no blown fuse lighter plug wont work sometimes there is a seperate fuse for just the lighter in the wiring behind the lighter socket you will have to either remove the socket or

...get the plug out. no special tools needed except socket long extension and ratchet. just remove the wires or coil over ignition coils however your car is setup, install socket and remove the old

plug wires have a rubber boot on the end of them and some times they come off and stay on the spark plug to where you can't get the socket on the plug. If you have oil on your plug wires than you need

what do you call the 2 black components bolted to the tappit cover to which the plug wires are attached Plug wire brackets?