...and turn clockwise (if driver side) until you hear a CLICK. This will release the shoulder harness latch that is in the upper track in the window and it let's it return to the closed door and ...
...you to open the hood without destroying anything. You have to remove the front grill to access the latch. Here's how. At either side of the grill there is a 10mm bolt that points down through the ...
how do you replace the seat belt latch for the drivers seat belt? Unbolt it from the floor board and slid it out of the seat. my driver's side seat belt buckle broke. where can i find a replacement.
...the fuel rail that runs along the the intake manifold. If you're looking to put gas in, there is a latch on the floor between the driver's seat and the door which opens the gas door. Do you have
...good, eventually it will open. The next option is to pull the rear seats and go in and release the latch with a screw driver. Then replace the
...seat does not lay down on the DX models. open the trunk and look at the back of the seat for the latch, you should be able to see the mechanism from the
...Do this carefully. Next unscrew the handle cover. You'll see the lever handle is attached to the latch rod with a nylon sleeve over the hook on the rod This is flipped around to release it. When ...
...Shop rags 1Park the Protege on a flat, paved surface, apply the parking brake and release the hood latch. 2Place a wheel chock behind one of the rear wheels, then open the hood. 3Lift the left front ...
trying to remove door latch Trying to remove door latch on 1995 thunderbird. Car has power locks. inside or outside latch? please rate Section 01-14A: Handles, Locks, Latches and Mechanisms 1995 ...
I need information on how to replace (or service) the door latch mechanism on my merc. I have realigned the door (and realigned the striker rod) and it will still not close. The latching system does ...
247 questions posted
Usually answered in minutes!
549 Questions
373 Questions
369 Questions
284 Questions
255 Questions