1999 GMC Suburban "changing lifters" Questions

Ad

Question about GMC Suburban

1 Answer

1999 suburban lifer noise sound loud tapping noise on start up then reduces to light sounds like lifer noise replace exhaust check valve on driver side tat reduce 1 form of tapping but still have ...

Ad

Question about GMC Suburban

1 Answer

ticking in engine is this a problem a mechanic told me this is normal for this vechile This is not normal,ticking .most of the time is lifter noise,change the engine oil,use 5w 30w oil only,do not ...

Ad

I have a 2002, 5.3 L Chevy Suburban Z71 with 170,000 miles. I used to have the normal cold start tapping and it would go away after 2 or 3 minutes. Now when I start the engine, the tapping sound is I ...

2003 dodge intrepid taps loudly after warmup enigne starts easily with slight tap, gets quiet after a few seconds. Runs excellent but tap returns after engine warms a few minutes and get louder after ...

Question about GMC Suburban

1 Answer

the alarm was on but it is not now but the engine spins over but no fire? TIMING CHAIN NEEDS TO B REPLACED HOPEFULLY U DIDNT CHANGE THE LIFTER POSITIONING IF SO NEED ENGINE RETIMED $$$$$$.

Question about GMC Suburban

1 Answer

tapping in bottom for a few seconds then stops motor run good tapping stop i had my oil change also went back and change it again these engines have hydraulic lifters that open the valves,when you ...

2001 chevy suburban. I hear a humming noise from the engine. Engine ticks while idle for after a few minutes. Ticking goes away when I accelerate. There is a strong vibration when I accelerate in ...

Question about GMC Suburban

1 Answer

Low oil pressure at stop and knocking sound First check the oil level and condition. Have your trucks oil pressure actually checked with a gage. It should be at least 42p.s.i. to 55p.s.i. The knocking

burb is missing. put new fuel filter in plugs,wires.may be water burb is missing. put new fuel filter in plugs, wires,may be water in fuel not sure. If one cylinder is missing at idle, it would be ...

OK I HAVE A 97 GMC SUBURBAN WITH A 5.7L VORTEC. ITS GIVING ME A P0300 CODE I KNOW ITS MISSING ON CYL 5 AND 7 I HAVE CHANGED-INJECTORS-HEAD-LIFTERS-PUSHRODS-DIST-DIST CAP- ROTOR-PLUGS-WIRES-CRANK ...

Not finding what you are looking for?
1999 GMC Suburban Logo

1,320 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1995 GMC Suburban
1995 GMC Suburban

273 Questions

1994 GMC Suburban
1994 GMC Suburban

225 Questions

1993 GMC Suburban
1993 GMC Suburban

157 Questions

1992 GMC Suburban
1992 GMC Suburban

68 Questions

1990 GMC Suburban
1990 GMC Suburban

73 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...