power i put the key in the ignition turned it and had no power what so ever and now the key will not roll back and is stuck in the chamber I had the same problem with my S10 blazer. The ignition needs
Question about GMC Jimmy
key release button no electrical power also- does have manufacturer security system- tried jump start--no go If you can't get the key out you may need to change out the ignition switch it's not that *
...to the off switch. If you have absolutely no power in the vehicle and your key is stuck. I recommend cleaning the two way fuse located just beneath battery. My vehicle ran just fine
...key is stuck in the ignition and there is no power to the system. -No dash lights. No nothing. -The switch will not move from the off position. -The car has a security system that somehow might have ...
...power . Safety system-won't let the key be turned all the way off an removed again because of no power . You have to get it jump started an get it off the street . Then check out vides on youtube on ...
...no power. No inside lights nothing, and the key is stuck in the ignition Bad engine electrical wire.....going to fuse box......or not properly mounted..check wire for loose or missing
...key in and nothing no power at all now .. The key will not turn to off position to let me take it out , I brought battery inside put on charger says fulling charged .. any idea what is happening? can ...
...power anywhere, no lights no nothing. the key is also now stuck in the ignition, The main ground is supposed to be connected to the engine block, as well as the main battery positive being connected ...
...key and and the power would fail. I checked the battery, by attaching my battery charger, and the gauge on the charger reads full in the 2 and 6 amp setting. At first with the ignition key turned to ...
531 questions posted
Usually answered in minutes!
1,363 Questions
1,123 Questions
1,127 Questions
1,104 Questions
838 Questions
