1994 GMC Jimmy "bulb" Questions

how do i change the license plate light bulb on your back bumper you will see where your bulbs shine onto the plate with the caseing around it. slide your hand up into the bumper where the caseing is ...

LEFT BRAKE LIGHT DOES WORK ,CHANGED BULB STILL NOT LEFT BRAKE LIGHT DOES NOT WORK ,CHANGED BULB STILL NOT WORKING RAY P. check for 12v in left brake light circuit......if no power then bad brake light

...assembly out and take note of how the two tabs at the bottom fit into the frame. - Undo all the bulbs (Some twist while others require you to hold a piece down while you twist to release the

...or is it LED type? The high mount brake light has its own fuse, so check that first. The high mount bulb is generally a stabdard type (there may be more than one bulb) or you can replace with an LED. ...

...and back lights appear to be working just faster then the left its always faster when one of the bulbs is bad see all the bulbs including the one on the fender or one of the bulb is not of the ...

...be and how can i fix it? it is supposed to turn on when you turn on the key so you can verify the bulb is ok. If it is not turning on, the most common cause is just a bad bulb. easy to replace,

...for the brake lights. 93 GMC Jimmy. The brake lights stopped working and i have tryed the fuse, bulbs and the brake switch. What else could it be? Thanks 93 Jimmy... What happens if you have the ...

...- otherwise it's a pain to get them back in correctly. For a temp fix we removed the ignigtor/bulb and ballast, took the wires going into the ballast (regular bulb wires) and connected a 9006 ...

turn signal does not work and all bulbs have been replaced If the arrow light on the dash flashes, this means your flasher and multifunction switch are working, and your bulb, wiring to the bulb ...

...have a GMC 1997 1500 Sierra. Rear Right Tail light circuit board had been replaced countless times. Bulbs are not the issue. Believe mfg problem and short somewhere. Getting costly. Any ideas to ...