2002 Ford SVT Focus "gear rounds" Questions

i am unable to select a gear on ford focus 1.6 LX, the gear stick just goes round in a ircle sounds like your clutch linkage or your clutch plate.

i have a mk1 focus that will only go into 1st gear drove it to work this morning, dropped into second for the round about, heard a clunk and then a sound thant can only be discribed as stones in a ...

Ford Mondeo 2.0 diesel 2002, starting motor was missing now just spins. Is it likely to be the dog gear on the starting motor or more seriously the flywheel teeth. This is not a solenoid issue as the ...

loose with engine vibration. This will sometimes chirp when you go to Reverse and back to a forward gear. I hope one of these will solve your problem

...Hope this helps all.... If the key is stuck (won't come out) and the column is NOT locked, one the gear shift there is a plastic sleeve. Put the gear shift in park...slide your hand below the knob ...

...35 miles the other day so car was warm. came up to a bend put my foot on clutch to drop down a gear (so was probably idling a bit) and car cut out, lost all power steering etc. would restart ...

Got vibration through the break peddle in my focus st when breaking at high speeds , had the discs skimmed and new pads all round also had new tyre's all round and its still vibrating, can't think of ...

...making contact, thus not telling the ignition switch that the vehicle is in Park (thinks still in gear) and the key is not released. I had the exact same thing happen to me this morning when I ...

...when I was repairing the inside. Where does it go back into? That is not a screw, it is the drive gear for the disk changer. If you look inside the stereo, you will see a motor which has only a rod ...

My MF135 Tractor has developed a leak round the bottom pulley. New gasket fitted round the timing gear but leak persists round crankshaft gear/pulley. How can I fix this? Replace oil seal, check if ...