2006 Ford Mustang "back door" Questions

...will need to remove hinge and add washers to back side of hinge plate so it moves hinge out thus pushing door alignment back if hinge is welded on add washers to door side where hinges attach to

...door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the ...

...door frame get bent back and forth, and eventually they break. You'll have to remove the rubber boot the wires reside in and visually check to see which one is separated. The bad news is that ...

door back together so the exterior button works properly . Any suggestions? This is the passenger door on a 1966 Mustang. Any suggestions would be greatly appreciated. Bill Packer sounds like your rod

...you hit or were hit in the front and the front fender was slid back towards the door. There are shims in the joints and some of the shims could have moved or fallen out. This is simple body shop

door then I would suspect a switch. If the problem is with both doors then I would suspect a computer glitch. Either way I would reccommend taking the vehicle back to the dealer to have it checked out

...back up when the door is closed My driver side window will not go back up after I close the door. The Auto-up feature of the window stopped working as well. I heard that it would be a switch problem ...

right out of the door panel, and you can just exchange it with another, plug it in and pop it back in the door panel. Just make sure when you buy one you get the right color to match your door panel :

in place. so I replace with a bolt. but door back together. but it drop down in front again I think the front side is not all there. the back roller is ok. The tracks are loose adjust them and tighten

...back doors, especially on the bottom of the door. These seals sometimes break and fall apart. Make sure it is full, round, soft, and pliable. They need to conform to the shape of your door when the ...