2004 Pontiac Sunfire "cv" Questions

...it was making a loud humming sound. Still makes the sound though... What else could it be? possible cv joint failure Tyre patern not suitable for this vehicle Bearings and CV axles can make the same ...

i need to get the cv joint off the end of the axle shaft in order to get the new boot on how do i do it? i am replacing the inner cv boot and cant get the cv joint off what do i do. thank you the ...

2004 pontiac sunfire i cant get the cv joint to come out i've removed everything i need but it wont pull out is there something i'm missing? the interior circlip its in the end on the spline ,very ...

...the louder it gets.there is no noise when you turn or anything tho not shur if the wheelbaerings or cv joint going bad. CV JOINT DON'T HOWL, THEY JUST CLICK IN TURNS, U MUST HAVE A NOISY WHEEL ...

...fluid It doesn't have one. You have to remove a plug in the trans near the passenger side cv shaft when the engine is running and fill the trans thru the red cap near the air box until

...on my sunfire make a grinding noise when i turn or stop some times?? It could be caused by a torn CV joint boot on the axle. The boot holds grease to lubricate the CV, and when the boot is torn,

is a cv joint on a 1998 pontiac sunfire gt costly to repair Anywhere from $70-90.00 for the part and about 3 hrs. labor @ $65 an hour average. So, $250-275.00 for the job. Yes even doing the work ...

atv cv joint boot I put a new cv joint boot on my drive shaft. I can't get the clamp on the boot tight enough so the boot doesn't spin on the shaft. How do I get it tight without ripping the new boot ...

...output bearings will usually require the transmission to be pulled. If you are capable, pull the CV shafts and see if the play is in the transmission output or in the splines. Note that some ...

What size is the axle nut on the cv joint on a 1998 pontiac sunfire? I remove with a 29 mm. thaty is the perfect size but 1 3/16 socket will also do the job.