1989 Mercedes-Benz 300-Class "engine codes" Questions

Ad

Question about Mercedes-Benz 300-Class

3 Answers

...engine codes how to check engine code my check engine light came on 1992 mercedes benz 300e If you have a auto-zone parts store they can check it for free. you will have to borrow or purchase a code ...

Ad

Question about Mercedes-Benz 300-Class

1 Answer

engine check light came on Engine check light came on I got thr codes fromthe box red light blinking 5 and 26 times what is the problems!!!!! thanks code 526 is a random cylinder missfire detected,

Ad

...engine light comes on that means a fault code is stored for the problem that may be responsible for the no start issue. The next thing to do is have the system scanned for fault codes. Any Autozone ...

Question about Mercedes-Benz 300-Class

1 Answer

...Engine has stopped unexpectedly while driving, 2 codes (Check Oil Pressure & ETS) , alternator replaced, tension belt replaced. Both times that engine died restarted after after short time. ...

Question about Mercedes-Benz 300-Class

1 Answer

how do you flash the engine check light so I can get the codes? You cannot obtain codes from the motronic system without a euro flashed scanner.Sorry but you'll have to go to a shop to pull codes.

Check Engine light on 1992 mercedes 300 wagon= engine chekd OK Engine chekd ok...but light stays on A service department will need to hook this up to a computer to clear the code. You could also try ...

Question about Mercedes-Benz 300-Class

1 Answer

...engine light is on for a reason. You need to pull the error codes, and resolve all of the issues indicated. Then the light will go off. If a condition were to happen, and be intermittent, the light ...

Question about Mercedes-Benz 300-Class

2 Answers

I have a 1993 mercedez 300E 3.2L gas engine and the rpms keep on going up and down when I stop at a light or put it in park. it does not do it while i am driving. I mean it will do it so bad that the ...

...ENGINE light is on, check the codes, and most likely you will find that one or more of the oxygen sensors are at fault. Try starting the car while holding the throttle at 1/3 to 1/2 until it starts. ...

codes to ensure that the EGR valve is faulty. Engine lights to not always come on unless there is something drastic going on with the engine /gearbox so that you can stop the car before damage is done

Not finding what you are looking for?
Cars & Trucks Logo

326 questions posted

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...