2001 Pontiac Grand Am SE "start anti theft comes" Questions

anti-theft is in the ignition. If you go to start the car, then leave the key in the run position when it does not start for about 11- 15mins. Once the security light goes off then turn it off and try

...now the factory anti theft has been activated, and I can't start the car. TURN THE KEY TO FIRST CLICK THE THEFT LIGHT WILL COME ON LET THE CAR SIT ABOUT 30 MINS THE THEFT LIGHT SHOULD GO OUT START ...

...start it, if your anti theft light stays on that's your problem, just leave the key turned on for about 20 min and then the light should go out, then it will start. We have this problem consistently ...

anti theft module the car will not start. the problem is the key or the ignition, the most common problem is the wiring to ignition or the ignition is bad, both ways the ignition cylinder lock must be

...start Anti-Theft system light stays on I suggtes check the THEFT SYSTEM disarm procedure section in your Owners Manual; if you dont have this document, could download from this link: ...

anti theft light i have already changed the fuel filter and problem still pursist. i continued cranking it over and eventually it stayed on however it turned on and off for a few days, i am afraid the

...anti thefts are known to fail and cause the car to not start, stall while driving, or start for 1-5 seconds and then die. A good indication that the security is failing is if you see a light on the ...

anti-theft ignition in which i havr the replacement part. my question is how do i reset it so that the new switch will work? disconnect battery for 15 to 20 minutes then connect if it comes back on go

CAR WIL START BUT SHUTS OFF AFTER ABOUT 2 SECONDS RADIO WONT WORK AND TRUNK BUTTON DONT WORK. I HAVE TRIED THE RELEARN AND IT STILL WONT WORK Could be the anti theft system coming on

...anti theft security system on a GM is, it will start for 1-5 seconds and then shuts down. Changing the tumbler and key is a problem on these systems. The signal that comes from the key to ...