2001 Pontiac Grand Am SE "02 hazard switch replacement" Questions

...switch is bad I have an '02 Grand Am, same problem.. random blinker noise when neither the blinker or the 4-ways are on... was originally told it was the relay switch behind the hazards button.. nope ...

hazard switch in my 02 gmc envoy ..a vid would be really hepfull Are you sure that is what you need to replace ? Do the turn signals work ? May be the turn signal hazard flasher module is bad ! How To

...02 beetle 1.9tdi with turn signal issues. The problem is none of them work. I checked all of the fuses, and I have power getting to the hazard relay/switch but not out of it. When I activate the turn ...

Hazard button and door lock button not working 325i 02 Checked fuses...unable to solve the problem. I can't find a fuse for the hazard lights, is there another location for fuses? Both buttons are ...

...02 Beetle TDI. Recently, the blinker has started to click, click, click, after the blinker has stopped blinking. It will click dozens of times over a minute or so, then stop, then click at random ...

...Hazard lights in 88 Camry " By w_wanefalea on Nov 02, 2009 " " When I put on the indicator switch the indicator does not work at all, also I try to put on the hazard lights again they didn't work.Few ...

...02 pontiac grand AM . Try moving the switch handle , lightly ,all direction's to see if they start working again , if they do it's the switch . If not , it's the hazard/ flasher module . There was a ...

...02 and one day I noticed there were no brake lights, but the 3rd light on top worked fine. I did some research online and found out there was a recall on this problem due to the hazard switch on the ...

...02 beetle today i noticed that the arrows on my display were flashing faster and making more noise than normal,is this a warning that i need to change the bulbs and if so how do i do that? replace ...

...Hazard switch. Have you done work recently on the radio or anything in the dash where it could have come unplugged? I would check the switch and make sure it's all connected there first. I have seen ...