2004 Oldsmobile Alero "replace ignition key module" Questions

GOING BAD.THE DEALERSHIP HAS TO FIX.IF THEY HAVE TO REPLACE THE IGNITION SWITCH - KEYS - OR BODY CONTROL MODULE.THEY HAVE TO REPROGRAM NEW KEYS AND IGNITION SWITCH TO THE BCM AND PCM SO CAR WILL CRANK

and may have gone bad.Repair is to replace the ignition cylinder and reprogram the the passlock sensor. my car sat for two months, and i did what you said and i be damned she cranked rite up thank you

...key but no dash lights doesnt crank.. just completely dead... i checked battery, replaced starter, replaced the ignition control module but not the ignition cylinder.. has this happend to anyone and ...

...key in the ignition in on position and have left it in there for several hours ( even over night) mechanics have told me there is no fix. is there anything to fix the car? Try replacing the ignition ...

...replace startwr try this site The security, antitheft or lock picture/icon is a visual indication that something in the car's antitheft system is failing. In most GM cars and trucks there is a hidden ...

...ignition control module and fuel pressure regulator,still no start Instead of just bolting on parts, run simple tests. Do you have spark at the plugs? If no, test coil. Correct fuel pressure key on ...

replace the fuel sending unit. You can try spraying a little starter fluid through the air intake and see if the engine starts, if it does. Then you have a fuel issue, and if it doesn't start. The you

...key in the ignition, there begins a constant line of communication between your key's security chip or transponder, to the ignition's lock cylinder, and then to the car's TDM (Theft ...

...module, ignition module, coil pack, crank sensor, and ignition lock cylinder replaced, and I have a whole new ignition and new keys now, and I still have the same problem. I got it back from my ...

...IGNITION MODULE FAULT CRANKSHAFT SENSOR FAULT AND PCM FAULT.IF ALL LOOK GOOD SO FAR.CHECK TO SEE IF FUEL PUMP WORKING.CHECK PUMP FUEL PRESSURE IT SHOULD BE 41 - 47 PSI. IF NOT REPLACE FUEL FILTER ...