1988 Oldsmobile Cutlass Ciera "iac 97" Questions

...IAC or idle air control valve in my 97 ford expidition 4.6l v8 triton. can anyone help me w/ this? Tnx & more power.. I.A.C sit in top on T.B.I. it's held on by two 8mm bolts, remove bolts clean ...

...97 Daewoo Nubira 1.6L Eurowagon Car us idle-ing between 1500-2000 rpm just after i start it up drives well but just idles real high probably a vacuum leak Hi, I had this problem with my 1998 daewoo ...

...97 chevy and my truck is ideling rough so with truck running i unplug the maf sensor and truck died instantly plugged back in fired right up and also with truck running i unplugged iac agian truck ...

...97 f150 is running rough and dropping to 500 rpm when put into gear. it has new plugs, fuel filter, and coil packs. sounds like an IAC issue. I'd try cleaning it out with some brake cleaner, until it ...

97 silverado Have changed iac valve, tps, maf, map, intake air sensor cleaned battery, no vacuum leaks. Also new air filter pcv, and spark plugs. Still have high idle problem on 97 silverado 4wd 1500.

...iac or tps 97 4 cyl tacoma, starts but dies after about 4 seconds. will restart but do the same. if you keep foot on gas for a couple mins it will idle and run, but not good. has crankshaft sensor ...

Heritage or lightning ( the same body style as the 97-03 MY ) the IAC is on the back the throttle body, held on with 2 8mm screws. You would need to remove the plastic throttle body cover to get to it

...97 Saturn SL2 the RPM's don't drop, they will go to about 2500. When I come to a stop they will go down after about 5 seconds, but only if I stop. Speed sensor maybe? The idle is ok, because if I'm ...

bolts and remove the IAC solenoid and gasket from the throttle body. Installation is the reverse of the removal procedure. Use a new gasket and tighten the retaining bolts to 71-97 inch lbs. (8-11 Nm)

...97 explorer idles @ 2000 rpm after -0 start w/ether. already rr maf sensor, brought it down from 3000rpm to 2. I have no diag eqp mech told me it was the prob from the ether Try cleaning the throttle ...