1999 Oldsmobile Alero "3400 v6" Questions

...3400 V6. I have a 2001 Oldsmobile Alero, it is the 3400 V6. It has 130,000 miles. Today, out of nowhere it died while I was driving. I was luckily able to pull over. Finally after some time was able ...

...Common engine size is the 3.4 V6 on the Alero but there was also a optional 2.4 liter I4 available. The V6 will have stamped in the engine upper intake 3400. Thank you for using fixya and good

cant find the belt routing for a 1999 Alero 3400 3.4 V6 engine Below is a link to the diagram you requested. All the best! Greg http://www.mvreader.com/multiview/dayco/graphics/rtdiag/bmi.jpg

i have a 1999 alero 3400 v6 wont start bucks like timing not right plugs r wet tach dosent move while cranking SOUND LIKE FAULTY IGNITION MODULE.

...the serpentine belt for a 1999 3400 v6 oldsmobile alero? DRIVE BELT ROUTING DIAGRAM LOCATED ON THE ENGINE NEAR WATER PUMP PULLEY.IF YOU DONT HAVE ONE AUTO ZONE AUTO PARTS STORE WILL PRINT YOU

how to replace timing belt on 1999 olds alero 3400 v6 Trying to determine if I should attempt this job myself. It does not have a timing belt.....It is a timing Chain and gears !

...V6 3400 takes 4.5 qts as far as the oil filter also depends on the engine. the 2.2 takes a paper element. look to the right of the engine and you'll see a black round canister with a hex looking nut ...

...3400 v6 then after i put it toget and drove it about a block and it died then i could get it to idle and start after i put startin fluid in and it would run and drive for another block then do the ...

...3400 2003 Hi I can help. Please see the diagram below for the 2003 GM 3.4 fire order. If you have any comments please feel free to leave them here. Hope this helps and thank you for using FixYa. ...

...V6 3400 engine. Dear, please get the Head gasket replaced of the engien as it seems to have leaked. thanx Sounds like a head gasket. Could me other things but you don't want oil in your cooling ...