1997 Oldsmobile Cutlass Supreme "replace turn signal blinker" Questions

...turn a blinker on then depress your hazard switch, if the start to flash then the switch is bad and needs replaced. About 150 at a parts store. And the blinker relays are located under the drivers ...

...replace the turn signal flasher. The turn signal works okay when I left signal, but when I try to signal right; the light just stay on. Check the the bulbs at the front and rear of the vehicle work. ...

turn signal mulifunction switch failed. You will need to replace it. This is a common failure. Also you have a blinker relay somewhere. Get someone to replace it. I dont know where its located on your

i broke my blinker switch and now my break lights dont work what do i do Have someone replace the turn signal switch.

...do I do This is normal when the car is not running and the key is in the run position. If they aren't working when the car is running, then you need to replace your turn signal relay. I hope this ...

replace the bulbs. there are 2 elements inside the bulb one is for the brakes and running lights and the other is for turn signal. if your fron signals work there is no problem with the circuit itself

...wheel removal, and a replacement of the turn signal switch,one of our experts will be happy to talk you through the process.or we can direct you to an online manual. thank you for choosing ...

...Replace The Turn Signal Unit Located Under The Driver side Dash The Best Way To Identify it Is To Go Buy Another One And Then Find It Under The Dash. Quick Fix Thanks For Using Fixya.com Sincerely, ...

...Turn the key to the on position (do not start engine) Inspect the system fuse located in the fuse panel and replace if needed. If you cannot find the location of the blinker fuse consult your owner's ...

...was coming out of the turn signal arm. In that case it could be shorted out. To replace the turn signal arm assembly is pretty expensive. Maybe around $200.00 for parts and labor at a shop. Good