1996 Oldsmobile Cutlass Ciera "positive examples" Questions

Ad

need to adjust the valves on a 3.1 oldsmobile ciera.There is no mark on harmonic balancer. Valves are self adjusting. Coolant in the oil from bad intake gaskets will ruin the lifters. Replace the ...

Ad

94 olds cutlass ciera service engine soon just came on what should i do the service engine soon light is on what do i do? If the service engine light is on, this is in a way a good thing. This means ...

Ad

...Ther are two batterys 12 volts if you want the same voltage but with increased capacity connect positive to positive and negative to negative on each successive battery ---connected in ...

Whats the function of a throttle position sensor and how would i test for faults Throttle position sensor A throttle position sensor (TPS) is a sensor used to monitor the throttle position of a car. ...

How do I fit the crank trigger wheel in the right position It was suggested that the hole in the wheel should be in the 5 O'clock position and the minus 2 tooth in the 9 O'clock position, but that is ...

How do I set the open position and the close position The way you have posed your question it is not possible to answer. Set the open and close on what exactly? What year make and model of vehicle? In

Question about Toyota Cars & Trucks

1 Answer

I have an issue with my 1995 Toyota Tercel DX with a 1.5liter engine. I have replaced everything from crankshaft position sensor, camshaft position sensor,coolant temperature sensor, Throttle position

my w202 benz wont start but gives on, the fuel pump doesn't run and the starter wont crank the engine when i try to start it. i even tried to bypass the starter but it wont crank w202 c200 1999 model ...

Question about Oldsmobile Cutlass Ciera

2 Answers

WHAT IS A TPS throttle position sensor(TPS) its usually located on the throttle body on fuel injected cars. Throttle position sensor. It monitors the position of the butterfly in the throat ...

...usually shown as a "~" symbol and DC shown as a "-" symbol. You usually have to move the Multimeter positive lead to a separate socket on the Multimeter. Sometimes there are 2 sockets, a high range ...

Not finding what you are looking for?
1996 Oldsmobile Cutlass Ciera Logo

604 questions posted

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...