1995 Oldsmobile Silhouette "replace light balb" Questions

light balb? Open the rear window next to the taillight. Use a phillips head screwdriver to remove the screws and then flip open the clips. Remove the housing and replace the bad bulb. Do everything in

i need a code for a check engine light reset light balb was removed never replaced need the coe to reset it. Remove + cable from battery, wait 20 minutes and replace. This should reset computer code.

...light wiring diagram for 2004 Dodge Ram 1500. Needing to find which wire is used for reverse light low beam kigth out on driver side replaced balb an still dont work this is om my 2004 dodge ram ...

rate. right front parking bulb OK on park. replaced amber bulb but not solve It's a bad connection on the front balb u replaced or u might need to replace the light assembly as they corrode pretty bad

The left headlight and left brakelight on my '89 Volvo 240 are not working even after replacing the fuse. What can I do next? check to make sure the panel on the back of the lights are not loose or ...

...screws or little bolts that hold the light in take the bolts out and remove the tail light. to replace the balbs all you have to do is twist the pig tail socket and it will come out of the tail

...light plug or pig tail then you have a bad ground turn the head lights on and probe the ground wire with the balb still in if the lights come on the run new ground wire or find the broken wire and ...

92 Cutlass Ciera (92 Cutlass Ciera) My turn signals wont flash. The balbs are all replaced and the fuse is good. if the lights light but don't blink you have a bad flasher if the don't light at all ...

...light bulbs dont have bases so there is no way to tell. just replace them with what is called for from the jeep dealer. parts houses are just gonna match up what you have already so you will have the ...

light off pour some in it and then dry it out. You will see 4 contacts in there make sure they are shiny and then look at the balb to see if you may have a blown bulb. Replace and reinstall. Check the