...put it back together the way you took it apart. There are lots of screws so dont loose them.. Hopeful this will help you but like i said check that black box under your dash first it is a easy fix if ...
...put back on and car ran good again...so i splised in to the wire and ran other end to fuse box under diverside dass and put on wiper blades fuse so goes on and off when i use key. Car runs ...
...back for high beam flash left dim headlight would go out. put on high beems left light got even more dim. trouble shot wires and replaced blinker/high low beam/whiper unit didn't fix. replaced ...
...put the motor back in place and put the screws back in place and plug it back in. First thing i would do is unplug the old fan connector, and if you can get the new fan close enough to the connector, ...
Question about Oldsmobile Cutlass Calais
...back for high beam flash left dim headlight would go out. put on high beems left light got even more dim. trouble shot wires and replaced blinker/high low beam/whiper unit didn't fix. replaced ...
...back and forth but I'm not sure if it is the wiring or the motor it's self. There is also a button put in under the cigarette lighter and it says "RALLY" on it and I followed the ...
...put a meter on it and see if there is any odd activity. also the alternator maybe acting up or make sure that the starters wires are tight from the battery as well Ok then your problem is eletrical, ...
...you fix the fuse, reinstall your radio, put the plastic facia back on, etc. then turn on the radio and have static because the antenna cable popped off and you didn't notice. Hope this helps you
Question about Oldsmobile Cutlass Calais
...put the valve back on with a new gasket, if needed.Some people just do away with the egr valve when it stops operating, by taking off the vacuum line to it and plugging the vacuum line off. Then the ...
128 questions posted
Usually answered in minutes!
79 Questions
19 Questions
8 Questions
6 Questions