1998 Dodge Stratus "limp mode" Questions

my 2001 dodge stratus keeps going into limp mode You need to start by getting the codes,every one should know thatWhat limp mode,all MFG have different systems?You will need OBD1 Scan Capability

...limp mode. po700 and po888 came up on my scanner. I knew my battery needed to be replaced and also thought that pcm was reading low voltage and thought that would be the reason why po888 for code. So ...

...be going into limp mode if the computer sees a problem,usally the speedometer isn't working or the output sensor is faulty,if it is in limp mode,turning the key off then back on will reset the ...

...limp mode. This enables you to drive the car to service. Anytime there is a transmission code in the computer even if nothing is wrong it will stay in limp mode until the code is erased. Most retail ...

limp mode I've replaced the coil three times,the grounding strap and clip behind the head, the cam sensor twice,boots, plugs,map sensor, IAC, pcv valve and air filter. Keeps going into limp mode every

...limp mode after some time passing over rought tewrrian (i.e. rail road tracks). The solnoid pack has already been replaced & the Dodle dealer does not know what is wrong. I am wondering if it is ...

limp-in" mode which the transmission controller is programmed to do when some part/wire goes bad such that if the unit was allowed to shift it would damage itself unnecessarily. It is designed to keep

limp mode, second gear forward or reverse. It doesn't have a speedometer display or the tachometer most of the time. I replaced the output speed sensor and the Tr My 1997 Dodge Stratus is stuck in

when driving transmission is only in second gear Trans is in limp in mode. Need to have codes scanned, also check CVIs with scan tool. Write it all down and let us know.

stuck in limp mode wher are sensors located for better result download the pdf file DODGE STRATUS SERVICE REPAIR MANUAL 1995 2000 DOWNLOAD