2004 Mitsubishi Endeavor "reprogram key security system" Questions

key the alarm went off they un hooked the computer to turn it off when we got their to pick it up we hooked the computor back up but it will not start the battery just clicks. Is this part of the anti

...key on , and jump starter will start for a few seconds , anti theft engaged. OBD II no connection, check fuses need to reset. You need an auto electrician. First to find out why the OBD Port is ...

...a battery charger on it while the key is on, If the battery goes dead during the 10 minute reprogram sequence, you will have to start over again.

...KEY SWITCH? OR I NEED REPROGRAM THE SECURITY SYSTEM? U need to change the ignition key lock cylinder and have the secrity system module reprogramed to reconize the new lock cylinder, so this job is ...

...security mode and when you turn the key it just klicks behind the fuse box and wont start Please check that the key is paired with the vehicle's security system. If you have a spare key, then ...

...the module that detects the key to the bcm (body control module) hope this helps good luck NAT system reprogram if necessary= reprogram the key in your car if it new or replace with new= problem ...

...to new key new ignition switch key lock system. dealership fix need diagnostic eqquipment to reprogram new ignition key and ignition switch lock cylinder to the immobilizer control module and

...security system Your PATS key may have to be reprogrammed to the car. PATS(Passive Anti-Theft System). Some key and lock shops may have the scan tool to do it, otherwise a trip to the

...security alarm you may have to have the immobiliser system reprogrammed for the new ignition switch and key. The transponder in the new key will need reprogramming to the CPU in the car. Take it to a ...

...to disarm this or reset it ? you will have to go to a shop that has the tool to reprogram the security system with all the keys that are being used so they can be reprogramed to the security