1991 Mitsubishi Mighty Max "dept pump motor" Questions

...pump if needed. I understand that this truck needs fuel pressure so i dont know if its getting enough pressure. Please help! Thanks! you can get pressure specs from your local parts dept, and check ...

...motor ..was working fine untill i hit curb,have replaced fuel pumps and still no fuel,both tanks are full of fuel The inertia switch has tripped I am not positive where the reset switch is, look ...

...pump lines are not connected correctly And the diagram on the hood does not address this on what hose goes to what It is very likely that the vacuum hoses are the problem. The only people that have a ...

...pump control circuit open (PO627) FORD SAID DONT WORRY PROBABLY SOFTWARE PROBLEM PLEASE HELP Bring it to a different shop and have them diagnose it. If it was a true software bug, Ford would have ...

...Parts dept. chevy dealer will print you one out. i have a 96 chevy van 1/2 ton and it wont start engine turns and i have spark but no fuel i changer the relay and the fuel pump ? wat should i do

...pump. this type is difficult to replace, and sometimes requires replacment of the entire sender unit. Best way to tell is to call a nissan spare parts dept witn you VIN number and ask if this filter ...

pump. not sure where the filter is but it is a messy job and you might want to find an independant repair shop the will do it for a good price. all cars are required to have an emmisions sticker under

...dept. green antifreeze is allright,general motors call for dex-cool (orange) if you want to go by dealers advice-dexcool(orange coolant) but most of the public uses green 50/50 that way you will not ...

...pump due to its location low down the loom was ok but was changed anyway and recorded and a dated sticker placed on cars glove compartment door inside to verify loom changed ? SO b4 you progress any ...

...pump. I don't think it's the sensor because it will run at normal temps Any ideas on what to tell the service dept to check or how to check what the problem is? 215f is NOT hot, 250f is. take a tech ...