1990 Mitsubishi Eclipse "turn switch" Questions

Ad

fuel pump doesn't come on when switch is turned on.but after turning engine over it comes on for a second when you stop turning engine.1999 mitsibichi . changed fuel pump relay switch didn't help. ...

Ad

Question about Mitsubishi Eclipse

1 Answer

...the turn signal Switch/lever assembly on your car , do the turn signals work at all ? if they don't try the 4 way flasher , if the 4 way flasher's work suspect the turn signal switch . Hope this ...

Ad

Question about Mitsubishi Eclipse

2 Answers

...switch does not turn on, replace solenoid and pressure switch assembly. Recheck trouble codes. If trouble code resets, replace TCM. 4.Check and repair wiring harness between transaxle relay connector ...

Question about Mitsubishi Eclipse

1 Answer

...what is the trouble. If the right side blinks normally, it's not the flasher. If you mean the left signal is on when the turn switch is in neutral position, it is probably a bad turn signal

Question about Mitsubishi Eclipse

1 Answer

...you. Start by checking the fuses then move to the light bulbs. If those are ok check the flasher switch and then the turn signal switch. More than likely you will need to replace the flasher

...turn the key, and see if it travels the same amount. If not, you'll need to DISCONNECT THE BATTERY before removing switch, being careful not to bend or tweak that rod. Take the switch to your local ...

my turn signals on a 2001 eclipse dont work but the4 way flasher doe...ive check the fuses, bulbs and the switch unit itself...whats the problem?? TRY REPLACING THE HAZARD SWITCH. THE FOUR WAY SWITCH.

...of mechanic shops.Someone will tell you for free.Many are under the hood.No hazards too probably?It's the switch that makes that click click switch when it is working and you turn on your

...turn in cylinder to start engine relax the stering wheel by turning it in the direction to free it up so that there is not pressure locking up the ignition switch and may damn sure its it park. you ...

Question about Mitsubishi Eclipse

1 Answer

...turn to ACC position. Using a small Phillips screwdriver, push cylinder lock pin inward. On all models, remove ignition switch, steering lock and bracket. Installation To install, reverse removal ...

Not finding what you are looking for?
1990 Mitsubishi Eclipse Logo

60 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...