2001 Mitsubishi Galant "power window" Questions

up Hello, window not rolling up may due to the 4 reasons below:A) no power (+12V) to any of the power windows.B) Bad switch.C) Bad motor.D) Wiring problem between the switch & motorFrom Chinasinoy

...power window regulator will solve this problem. It's also possible that the attachment point between the window and the regulator is at fault, but I'd be more inclined to believe that your window ...

...power window is not working Front power window (driver's side has not been working for a while. Now it suddenly started to work, but only a short moment, it stopped the operation after a couple of ...

...Power Window Relay and the Power Fuse for the Windows. go to dealer and ask for the diagram of your electric window read it carefully before you buy a relay it might be a fuse only. check the fuse ...

SUN ROOF, POWER WINDOWS STOPPED WORKING ON 1994 MITSUBISHI SUN ROOF, POWER WINDOWS AND THE ELECTRIC LOCKS WILL NOT OPERATE, ALL LIGHTS, RADIO, AND NIGHT LIGHTS WORK. Have you checked the fuses yet ...

power window doesn't work on drivers side only 2003 galant es. driver's side power window not working. window is totally down and not coming up. I had the same problem with the driver's side front and

window stuck all the way down and I can't roll it up/down using the power switch. I can hear the motor sound though. How can I bring it back up? I bump the door, putting W40,and both do not work. If I

...power windows do not work. the driver window works fine. They were working one day, then the next day, nothing. check your fuses and when you open the doors there is a rubber tube and the wires pass ...

...power window doesn't work on rear driver's side...sounds like something is loose inside your going to have to remove the door panel. remove the screws and you will iencounter plastic pieces call ...

...guides and motor, temporarily connect power window switch and carefully raise window regulator until clamps are resting in place under window glass, tighten clamps. Test before putting panel back