1998 Mitsubishi Montero Sport "put belt" Questions

putting the alternator belt on a montero sport  FOR 3.0LENGIBE. PUTTING ON ALTERNATOR BELT YOU NEED TO LOOSEN LOCKING BOLT IN SLOT IN THE BRACKET.LOOSEN PIVOT NUT BOTTOM NUT USE A PRY ...

put the belt on by looping the belt partially on a fan blade and then turnning the fan blade kinda like a bicycle chain and if it is the power steering belt there is a guard over the top of the pulley

...mitsubishi sport i need to change old belt and put a new one on On the 3.5 engine, the parts book shows a regular V belt for the ac.There should be an idler pulley you move to get the belt off and

put the belt when the number one piston was at top dead center on the exhaust. Take the belt off again and make sure that when you replace the belt thet your number one piston is at top dead center on

...put on belt dressing and the pulley got wet. I heard the same sound coming from other monteros as well, is this common or coincidence? I am thinking it is just a loose bearing in the ac compressor, ...

...the tension on the belts,if the pulley bolt has not loosened up by now ,you dont have a bolt problem-when you have the timing belt replaced ,have the mechanic put some lock-tite on the ...

Is there a tensioner that has to be loosend to replace A.C. belt? Welcome to fixya. yes all you need to do is release the tensioner and put the new belt on. Yes. It's the only tensioner on the engine.

...turning. Since the engine overheated to the point of shutting down, blown head gaskets are a possibility. Put a new timing belt and water pump on it and start it up. If it runs OK, you're good to

belt keeps coming off When you say keeps coming off After you put it on once & it comes off again,would you not stop using it & resolve the issue? I would think that the crank damper pulley is

...put a wrench on it it will move either way to relieve the tension on the belt to remove it. This will be very easy for you to do. Please don't forget to rate me as I know you will be kind. I will ...