1998 Mitsubishi Eclipse "non turbo starting problems" Questions

...to 6000 rpms and stays there please help with any suggestions thanks The engine is the 2.0 non turbo started surging then progressed to this problem Check throttler pedal and cable for stuck ...

...non-turbo I been have a problem of a no start.I can start the car from the ignition switch but it won't start from the key? So I change the key lock cyclinder and the house and I still have the same ...

non turbo. I changed the water pump and put on a new head gasket . Now it will not start the crank is slow? What is the problem ? I have aligned all the timing marks according specification. I am at a

...NON TURBO. WHILE IM DRIVING IT JERKS AND SOMETIMES WHEN IT STARTS TO **** IT LOSES POWER AND WHILE ITS JERKING THE DASH LIGHTS COME ON LIKE IF I WAS CUTTING THE ENGINE OFF. ANY IDEAS?? DONT HAVE ALOT ...

non turbo There is actuly 3 of them one on each front wheel that sence the speed that the wheels are turning . And one on the transmission tail stock that sences the speed the transmission is turning

...Non-Turbo, thanks for the help :] Check all of your fuses and all of the connectors at and near the distributor/coil. Hi. I see you posted your question a long time ago. I am currently having the ...

non turbo eclipse has a different computer from the 96 to 99. and the gst and the gsx computers are different from eachother. the gst and the gsx computers are also different from the 95 and the 96-99

...non turbo P1494 code can cause by EGR lift sensor. When the engine is cold,disconnect the EGR sensor connector and clean the contacts. Reconnect the EGR connector and reset code. ================ If ...

...non-turbo with 180K miles. My first problem was a leaky water pump then it started over heating, running rough then stalled out. I replaced the water pump and timing belt but I still had the rough ...

...non-turbo DOHC engine vin y. Car stalled and turns over but will not start. Towed to repair shop and at first they said it was a defective cam or crank sensor, but now they say it is the computer ...