1997 Mitsubishi Montero "gate hinges" Questions

...gate off hinges for the past year I have had to lift the tail gate to get it to shut fully. Last night it totally came off teh hinges. Even if I can get the gate hinges realigned, I don't see what ...

...gate fell off its hinges. I've had to lift up on the tail gate for the past year to get it to close properly. Last night, it would not shut at all. I looked at it this morning in the light and found ...

...headlight bulb retaining clip 1. make sure the bulb is fully seated. 2. the clip is hinged--like a gate-- at one end. Swing the "gate" shut. Its center will contact (jam on) the back of the bulb. ...

I can't get my 95 gmc tailgate to come off. I know that you usually open it alittle and it will come off. But mine will not. So I would like to know if there is a trick to taking a 95 sonoma tailgate ...

How do you remove the tailgate on a chevy 3500 HD. I want to replace with a 5th wheel tailgate It should work like this: Let the gate down, take the 2 cables loose from the top, lift the gate a little

gate hinges? Changed the lift struts and shortly after I noticed wind noise. There is a gap at the top of the gate on both sides. This vehicle has not been wrecked. Thanks You might want to check if a

...open, lock and unlocked still wont open gate wont open, lock and unlocked still wont open it may be that the gate has dropped on it's hinges, try lifting as you open. (i assume a side opening

How to replace the tailgate hinge (tailgate side). There is only 1 bolt visable and once it is remove the hing still won't come off. How do you replace the tailgate hinge (Tailgate side) there is only

...rear window washer on my 2002 Chev Blazer? The hose runs along the frame and up through the tail gate on the two piece tail gate, on the single lift gate the hose runs from the top where the ...

...gate. At a point in time, Ford had a recall on some rear hinges. I don't remember which years were involved but if you let a Ford Dealer run your Vin# you may get free fix for your problem. Please ...