2002 Ford Explorer "place window back track" Questions

...place. I put glass back into the clips it will go up and support the window in place but if I try to lower the window the glass comes back out of the clips Special glue, check with the supply

window, and then remove all the bolts and drill out the rivets holding the unit in place. You will need to drive out the center of the rivets using a punch, and then drill through them with about 1/4"

...window motor works but glass seems to have come lose how is it attached and can it be reattached the motor and switch are good but the glass seems to be unattached to track how can i reattach it ...

...window track that is in front of the actuator to remove it easily. If not then you will have a very hard time trying to figure out how to get it out. There is a bolt that hold the bottom half on that ...

...,if it popped off loosen side track slide window over enough to get roller back in place and retighten side widow track back in place try window up and down slowly readjust side track if ...

...window in place and keeps it from being able to get out of the tracks ...put the adhesive in the bottom track before you push the window all the way down into the bottom track... roll up the window ...

...window. I was able to manually put it back into place, but here is a gap at top. I did not try to power it up yet. . What holds the window onto track on this vehicle. It seems like it may be back in ...

...back on track.i hope it helped. Hi! U did mentioned that the window came off track but u did not mentioned if it was placed back on track.For if it don't the glass could stock and prevented from ...

place the window back into its track"cradle" and loosely tighten the fasteners. and reconnect the window crank or window switch temporarily to slowly lift and lower the window while supporting it with

...window in place, and on track. You'll have to take the door panel off to see more of the window. Through the holes in the frame of the door, roll the window down/up, or pull it up/push it down, and ...