2006 Dodge Charger "resetting check engine ligh" Questions

...check engine ligh checked for trouble codes using my superchips flashpaq tuner using it's diagnostic feature and did not detect any trouble codes, what could this light mean? i cant find any ...

...check engine light. The check engine light causes the other lights to light up. Take off both battery cables and touch together for 20 seconds and then reconnect. the problem should reset. I had this ...

check engine and the maintanace lighs are showing on the board. what do ido it still runs fine the check engine light has come on because the computor on your vechile has picked up a problem. it could

...check engine warning ligh Hi there:If it stays on, then you have a stored code that indicates a malfunction of some kind in your engine or transmission control systems.If the Check Engine Light comes ...

check engine ligh bulb in my 01 pontiac grand prix, now my odometer is reading 20,000 miles higher than it really is. What do I do? the odometer needs to be rest.Click the link below Speedometer/

...engine is running. It can damage the alternator and a lot of other electronics on the vehicle. The alt will go to the full charge mode. Most all of the dash warning lighs shut off thru a circuit that ...

...Engine light, trac ligh, all dash board warning lights go on. Car runs great. What can be the problem? You need to start with a code. If it says an o2 sensor B1S2 4 cyl replace sensor 1 first. As it ...

...in order to clear the light. In locations that require periodic emissions checks, your car will not pass if your check engine light in on. So, go to Auto Zone and start there. Hope thie helps! ...

...check enjine light came on and truck started missing very bad, checked why the ligh was on and obdll said there was no codes found, what to do ? No loose connections? You can disconnect the battery ...

...check engine ligh went off drive great no problems at all after about 10 minutes the problem recurred, went to cost less got new fuel filter but the problem remained. seems like a sensor problem but ...