...line up marks or time a dodge durango before removing head for gasket replacement I don't think you have to remove the timing chain, to do head gaskets. if you are talking about the distributor, you ...
...timing chain mark Clock position (The key aligns on the crankshaft sprocket with the mark on the oil pump (see arrow) body (see arrow mark) Align the marks on the sprockets Place the crankshaft angle ...
Question about Cars & Trucks
...timing marks are to line up and face each other then fin the chain then turn the crank until the crank sprocket is facing down timing mark is facing down the cam mark should be in the 2 oclock ...
be keyed so the gear cannot be wrong. Look for a mark on the gear and one on the head. Line those up. On the crank shaft use the timing mark and guide and line up to TDC or 0 and put the chain back on
...timing chain on a 2000 Pontiac Grand AM 2.4 YOU WILL SEE A HOLE IN THE CAM GEAR THAT A 3/8 BOLT WILL FIT INTO. PUT A BOLT INTO THE HOLES OF BOTH CAM GEARS. THEN LINE UP THE CRANK PULLEY KEYWAY AT ...
...to set cam and crank do you know the marks? complex job chains have coloured links to line up with gears and a set number of links between timing marks, best get a manual or a professional to do ...
...Timing Mark on the Cam Shaft and one on the Crank Shaft,NOTE: BESURE you line them marks up,The Cam Shaft Mark should be pointing Straight Down--And the Crankshaft Mark needs to be Pointing Straight ...
Question about Toyota Cars & Trucks
...timing chain. To see if the chain is bad it is best to take off the timing cover in order to see it the timing marks are correctly lined up because the chain may not have broken, but have jumped ...
Question about Cars & Trucks
...timing marks for this 2000 Cherokee 4.7 engine, take a close look at cam gears for markings, and crank is lined up using the pulley, after new chain is installed spin with a socket slowly two turns ...
...make an engine run bad. What is the problem you are having? I tried to do timing chain on 2000 impala 3800 but its not starting if u can tell me how to line up the timing marks I think I done it ...
1,588 questions posted
Usually answered in minutes!
2,049 Questions
1,616 Questions
1,378 Questions
886 Questions
766 Questions