2006 Volkswagen GTI "oil coming jetta 1 air" Questions

...oil and pushed the key in until it stopped. If you look into the ignition, there is a little grey tab. That is the part you need to settle back in. I pushed the key forward and back a couple times ...

...Jetta TDI and am problems with the turbo. Apparently I have a seal leak and oil is getting in the intake duct for the intercooler. I have two questions. 1. Can I continue to drive with the bad seal ...

...coming on in my Jetta. I have ran codes fixed the brake sensor, gas pedal, and gas sensor in the engine. I am out of guesses what it could be. I can usually go about 100 miles untill it shifts hard ...

Jetta OIL LIGHT sensors mistake (Require?)Burping of a coolant system? 97 VW Jetta Diesel 200,000 km. Been having coolant system problems. Had water pump replaced recently and coolant system seems out

...Jetta, VW has release a service bulletin on the oil in intake problem. But I can't remember every thing in the bulletin. I'll have to look it up. I am having same issues with my 01 1.8T I've replaced ...

...oil coming from the oil sum so first dont drive until you solve the problem, your problem is two first it can be oil pressure swich or oil pump good like. I just had the #1 and #2 coils changed in my ...

oil filter and sits between the washer bottle and the metal that forms the wheel well. It is held in by a screw type clamp about half way down the cylinder. Probably isn't the fuel filter unless there

jetta GL 2.0? Please provide pictures or drawings. Can't provide pictures, but it's not hard to describe. You will need a normal set of metric sockets... a 13mm and a 17mm if I remember correctly. You

...jetta tdi, has engine miss & lack of power, has p0101 present, if unplugged has less power, but misses less, already cleaned extremely clogged egr valve, changed engine oil/filter, checked maf ...

...oil to start the car then once started the glow plugs are disingaged so they are not in use. I dont think this can cause this problem Someone said disconnect the temp sensors because if they are ...