2002 Pontiac Aztek "intake torque" Questions

rocker torque I am changing intake gaskets and need the rocker torque for 2002 aztek 3400 thank you John 89 inch pounds and turn 30degrees

...Torque to 8 inch lbs. Tie strap holding the instrument panel harness to the heater core cover Center floor air outlet Right and left instrument panel insulators Hoses to the heater core Transmission ...

looking for torque sequence for intake manifold you need a service manual for this

...intake gaskets and need the torque specs. for the rockers 2002 pontiac aztek 3400 89 inch pounds then 30 degrees. make sure the push rods get put back in same place they came out they are different ...

torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems. Install the

torque the intake manifold to? ... My haynes manual says to torque the upper manifold bolts to 13-16 ft/lbs ... Supporting Maxima.org Member. valve cover and intake plenum bolt torque specs - Maxima .

...torque. Upper Intake Plenum: When installing the intake air plenum , be sure to catch the four center bolts and the two side bolts (stiffener brackets) before tightening , The center bolts should be ...

...torque the intake bolts when installing the intake manifold? It is recommended as most intake manifolds are either cast iron or cast aluminum. Uneven torque can result in warping. Too little torque ...

...Intake torque specs ' FordForumsOnline.com www.fordforumsonline.com > Ford Tech Forums > Engine & Drivetrain May 7, 2010 - 2 posts - ?2 authors ISO torque specs for the intake & plenum for a ...

...Intake manifold torque sequence-3.7 & 4.7L engines Hope this help (remember comment and rated this). attached is the picture of the torque sequence for bolts and the torque specs. as u can see ...