...PCM then grounds the control circuit of the START relay. When the START relay is energized it allows battery positive voltage to the starter solenoid S terminal. Try moving the gear selector to the ...
...terminal A3. When the PCM receives this input, it enables the fuel delivery system. • If the values do not match, the theft deterrent module performs the following system disable functions for ...
...terminal. This pin is absolutely necessary to code retrieval (even with a scantool). Try this before you go to all the other trouble of searching for a blown fuse or a short or heaven forbid go and ...
...PCM terminal 89 below 0.10 V after engine start, PCM determines that TP circuit has a malfunction. POSSIBLE CAUSE • TP sensor malfunction • Connector or terminal malfunction • Open circuit between TP ...
...PCM terminal 1AU voltage changes while alternately accelerating and decelerating 8 times, the PCM determines that brake switch circuit has malfunctioned. • Brake switch malfunction • Poor connection ...
...PCM terminal 82 when alternately accelerated and decelerated 8 times, the PCM determines that brake switch No. 1 has a malfunction Possible Causes are: Brake Switch malfunction connector or terminal ...
...PCM terminal 10 • Short to ground in wiring harness between suction control valve terminal B and PCM terminal 29 • Open circuit in wiring harness between suction control valve terminal A and PCM ...
...PCM terminal 1B ? Short to power supply in wiring harness between throttle body terminal A and PCM terminal 1B ? Short to GND in wiring harness between throttle body terminal A and PCM terminal 1B ? ...
Question about Pontiac Bonneville
...PCM terminal 5H •Open circuit in wiring harness between battery positive terminal and drive-by-wire relay terminal D •Short to ground in wiring harness between battery positive terminal and ...
732 questions posted
Usually answered in minutes!
547 Questions
496 Questions
481 Questions
391 Questions
329 Questions