2000 Oldsmobile Alero "thermostat water outlet hose" Questions

Ad

Question about Oldsmobile Alero

1 Answer

water outlet housing wherethe overflow tubing connects to it. There is no gasket or o ring to solve this.. how do you fix it? check the radiator hose going to thermostat housing.it could be leaking.if

Ad

Question about Oldsmobile Alero

1 Answer

thermostat housing to water pump feed pipe bolts. Remove the thermostat housing to water pump feed pipe. Fig. Thermostat mounting-2.2L engine Remove the thermostat. To install: Install the thermostat.

Ad

...housing and hose. And properly refill the radiator with coolant. Remove radiator cap and run engine till thermostat opens - then add water till it overflows and then put on cap and tighten. U

Question about Oldsmobile Alero

1 Answer

...thermostat into the recess and glue the gasket to hold it in place. If it falls out of its groove during installation, the outlet housing can be cracked or a coolant leak will result. Before ...

water inlet/outlet housing looks like where a thermostat would go on the end of the motor not too far from the power steering pump, the plastic wears out and the thin rubber gasket stops working right

...THERMOSTAT AND THE COOLANT INLET PIPE FROM THE WATER PUMP HOUSING AND SEPARATE THE ASSEMBLY FROM THE ENGINE. LOWER THE VECHICLE REMOVE THE BRAKE BOOSTER VACUUM HOSE FROM THE CAMSHAFT HOUSING. REMOVE ...

...thermostat housing to the water pump. 2 Bolts that secure the water pump to the engine block. Water pump. To Install: Use a threaded stud in the hub to align the water pump sprocket. Install or ...

...water pump bolt Thermostat housing to water pump feed pipe 2 water pump to engine block bolts Water pump Fig. Water pump mounting-2.2L engine To install: Use a threaded stud in the water pump hub to ...

Question about Oldsmobile Alero

1 Answer

...Thermostat Water outlet Water outlet bolts and tighten the bolts, Torque to: 22 ft-lbs (30 Nm) Inlet hose to the water outlet Fill the cooling system. Test drive the vehicle to confirm the

thermostat. Inspect and clean the water outlet housing mating surfaces. Installation Procedure Install the thermostat. Install the gasket and the water outlet housing. Notice: Refer to Fastener Notice

Not finding what you are looking for?
2000 Oldsmobile Alero Logo

1,543 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...