2001 Mazda 626 "put clutch" Questions

...or something inside the transmission has broken. Can you shift gears with the engine running and not depressing the clutch ? Can you put the transmission in first gear and move the car by hand

...and look for a SMALLER size master cylinder which may be low on fluid.(PUT ONLY BRAKE FLUID IN TO FILL IT).Hopefully it is just low and the brake fluid fill will restore your clutch

...put it in 3rd, then was unhappy with 1st and 2nd and gets stuck in 4th sometimes while driving, by turning the engine off it releases 4th. Now 1st works on start up and 3rd and fifth always work but ...

...clutch in but will stop working again when I put the car into any gear. Also, seems to work when the clutch is pushed in and the car is in neutral. Even in neutral, if i let the clutch out everything ...

...there any that are made specifically for that modle or that would work on it. you'd be better off putting a Hub asy on the Compressor.Just because the compressor is locked up doesn't mean the Hub ...

...we put a new one and it blows as soon as you turn the AC on Try unplugging the compressor then put in a new fuse.  If the fuse does not blow, the problem may be the clutch on the

the clutch pedal went all the way but I can put it in 4 gear Does the pedal have a feel or does it just hit the floor?master cylinder will maybe need replacing or seals.

clutch system is just like the brakes and uses hydraulic pressure. If either the slave or mater goes bad there is nothing to put pressure to return the piston attached to your pedal. If you are low on

...clutch and pressure plate and put gearbox back on and got everything esle fitted,i put more trasmisson oil into the gear box and after i replaced the speedo plug the speedo stopped working after 20 ...

...put in less than a week ago. If key is in 'on' position all lights and dingers work...no problem....till you press the clutch down. Any ideas guys n gals??? Join up with MX6.com My Guess would be ...