2002 GMC Yukon Denali "computer reset date back" Questions

...reset the computer but as stated earlier if it comes back on after 50 miles get it checked at the dealer.. I have a Ford with the same problem and it has cost me $50 every 3 months to have it reset ...

...reset the time and date after reconnecting the battery and all start blinking? Original car stereo/tape changed. Thsnks Depends on the type of BSI ( computer under steering column) and type of the ...

...reset computer after 10 mins. plugged abs back up still running left it unplugged this problem is better delt with a dealer or up to date shop, there are a multitude of things that could be wrong, ...

...etc.. hope this helps you have to reset it using your buttons on the computer system where the date and time are. push the arrow and toggle with the other buttons untill you see the tire

...computer on. Is there a way that I can reset it? The engine runs fine so I know it works but it wont shift properly. Hope you put a PCM in. TCM is in side the PCM. The TCM sometimes needs a brake in ...

...computer reset itself after I reinstall another one. Hey replace that sensor you shouldn't try to run it with out manifold air pressure is vital to eng.wan"t rid off engine light?? disconnect battery ...

...radio and TV channels will be gone, fuel consumption rates, date and time, and all on-board computer data will be reset. Hope this will be useful to whoever search this problem.. Good luck for all

reset with remote or use a valid sentry key ( don't know what that is ) when i try to start the truck something clicks and shuts down everything.... dash lights , starter clicks one time , then lights

...reset all computer functions, like service lights, etc... Thank you!!!... http://www.automedia.com/Sensor_Troubleshooting:_Idle_Air_Control_Valve/ccr20010901ic/1 plz do check this link Thanks for ...

...reset the module has not worked. The answers are this so far. 1. Replace input and output sensors 2. Check wiring for fauly ground. 3. Clean Air intake valve on throttle. 4. Change transmissio fluid ...