2005 Mazda 3 "put serpentine belt 3" Questions

put on a Mazda? I am looking for a serpentine belt diagram for a 2004 Mazda 3 2.3L engine. Check autozone. they have the routing diagram. YOUR LOCAL MAZDA DEALER WILL GIVE YOU ONE OR DOWNLOAD ONE FROM

...serpentine belt and the tensioner pulley (basically the pulley at the front of the motor and right on top).Note the routing of the belt for reinstallation.Put a socket on the tensioner pulley (either ...

...serpentine belt. You can run down to your local auto parts store and buy a serp belt tool. Or you can take a 3/8 drive ratchet, locate the 3/8 square hole in your tensioner and put the ratchet in the ...

...serpentine belt broke on our 2005 Chevy Equinox and I'm going to replace it but, I'm not sure how to release the tension on the tensioner to put the new belt on. It's the 3.4L 6 cyl AWD. Get a 3/8s ...

...serpentine belt? you need a 3/8 drive socket wrench put it in the tensioner square and pull it it should free the belt or if you have one with a socket just put a socket on the 3/8 drive..do not ...

...it it replace a serpentine belt on a 93 chevy g20 van 4.3 hardest part is to remember how to rout the belt theres a place u can put a 1/2 inch or 3/8 ratchet on the tensior to make the belt slide ...

...serpentine belt to the diagram under the hood. I now have the problem of not having enough slack to put the belt over the alternator when the tensioner pulley is pulled back as far as it will go. I ...

...serpentine belt routing diagram located under the hood, then release the serpentine belt tensioner using a ratchet and socket, and carefully remove the serpentine belt from all of the pulleys with ...

...put on a serpentine belt of a chevy malibu.picture would help please. first of all,put a jack under engine, put wood on top to prevent from hurting engine,jack up till a little tension is on jack to ...

...serpentine belt. Please help!! is the a/c working ok??? shredding the belt may be cause by the a/c compressor problems. the "chunk" maybe not, but shredding tells me something does not spin when it ...