1996 Pontiac Grand Am "top cover steering column" Questions

top of the lock module assembly in order to release the steering column lock cylinderset retaining pin. Turn the steering column lock cylinder set (1) into the "RUN" position. Pull the steering column

how do I replace the hazard switch If it is on top of the steering column, you take the top half of the cover off and it should be clipped to the cover.

...top cover off, but the bottom cover is held on by the steering adjustment lever on the left and the ignition on the right. I've tried forcing it off, but fear I may break the cover in two. so your ...

...top cover of the steering column, there are no screws holding this just use screw driver and feed it into where the signal arm goes in and pry up now use the 7 mm to remove the two bolts holding ...

...top and bottom cover off the steering wheel column. Under the front of the steering wheel is a littlebracket that has 2 screws in it. Remove it with little vise grips [this pevents you from having to ...

cover and pull the halves apart. Next, loosen the main screw on the top of the turn signal assembly and lift it the steering column. IMPORTANT: Make sure to push the little pin in with a thin piece of

...top, fourth fuse position note: first two position may be empty).  If fuse checks out the connector behind the instrument cluster may have worked loose.  Remove steering column covers, ...

...top and bottom cover are snapped together remove the tilt lever it pulls straight out disconnect the wire connectors for the wipers headlights ect. then there is a bolt in the centre of the ...

...top half of the steering column cover. Now remove the 1 screw in the top of the turn signal switch and gently rock it back and forth to separate it from the column. Disconnect the wire connector and ...

...top of the multi function switch. Detatch the wiring connectors. Remove the multifunction switch. Use the #10 torx to remove all the #10 torx screws. Remove the cover and clean the grease off the ...