1996 Pontiac Grand Am "3rd brake lamp bulb" Questions

...diagram for a 1996 grand-am. the brake lights stopped working but the 3rd brake light still works. I assume the stop lamp bulbs are OK. Check the ground connection is ok at the rear brakelamp

...3rd upper brake light works fine ...... whats wrong ??? check the rear lower bulbs, if good nore than likely brake lamp switrch on brake pedal, 3rd lamp rns of separate circuit Do the rear turn ...

...3rd brake light works, but tail lamp brake lights do not. The 3rd brake light working does reveal that the fuse is good, and the brake switch is good. Check the bulbs, sockets, and the wiring between ...

...3rd Brake Light inop. Q is: What type 1995 Ford 3rd Brake Light inop. Q is: What type bulb is used in the 95 Explorer 3rd brake light? Opening up the light leads me to believe it's a gas tube. Later ...

...brake lights just the 3rd. I have taken it to a mechanic and was first told that it was the brake light module on the brake itself. Had that replaced and still no brake lights. Then i was told that ...

...blowing, why? answer, the brake lamps circuit is shorted. the fuse saved the fire. first replace both brake lamps or all 3 if 3rd lamp bs. most brass based bulbs can short easy . (glue inside

...the lamp sensor is very sensitive; it needs to see all the bulbs to be the same wattage. The wattages can vary from nfgr to mfgr. Let me know waht you find on the 3rd brake lamp in the back

...3rd brake light works all fuses are good Sounds like a broken wire somewhere. Since the middle brake light works I would suspect it is somewhere in the trunk or close to the back seat. Buy or make a ...

...brake lights except for the 3rd center light works bulbs are good center light works bulbs are good no power to sockets Possible that the brake light pressure switch is faulty, wires snapped to the ...

...3rd brake light and driver's side brake and reverse lights do not light up on my '94 BMW 318. Have checked the bulbs and they are good (bulbs do not have to be replaced). What's causing this problem? ...