2000 Mitsubishi Galant "cause oil goes throttle body" Questions

...oil vapour can become excessive when the valve stem seals are old and not doing their job adequately any more. Since your car is a 2000, its not unlikely. Piston rIng blowby is another source. At a ...

oil change, they said I have build up on the throttle body. Can this be the cause of the faint noise i am hearing? They suggested a fuel system cleaning. Yes clean the throttle body with throttle body

...oil filter. It goes down under the engine. This blockage caused a pressure buildup in the crankcase which caused oil to blow by the pistons and into the combustion chamber and out into the air intake ...

...cause drivability issues. Im assuming that there are ni mosfires or any other codes present. Its pretty hard to diagnose a problem like this over the internet but ill help you any way i can. Keep ...

...cause of that thee will always be oily smoke coming back past valves from the pcv valve outlet when the engine is stopped if you have a problem air filter then any fine dust will mix with that vapour ...

oil change? A faulty gas cap can cause the sensor to come on. Clean out the throttle body with a cleaner and see if the idle improves. I have replaced the gas cap, light was still on so I replaced the

...the reservoir or a 'milky' substance in the engine oil as these are signs of a blown head gasket. For this you will also possibly get thicker White exhaust smoke. These problems can cause power

...oil pressure goes back towards normal.is there a way to Corbin's no The low oil pressure will not affect the engine rpm. You need to find the low engine idle problem and correct it first. Could be a ...

...oil and ran it for 2 or 3 minutes to check for leaks. I came back 15 minutes later and now won't stay running. Suggestions? have you checked for vacuum leaks? thought mine was spark plugs and found ...

oil-leak.html-----------The plastic housing which goes to the upper radiator hose is cracked and leaking? http://schematicsdiagram.blogspot.com/2011/12/plastic-housing-which-goes-to-upper.html  -