2000 Mercedes-Benz S-Class "steering wheel locked unable insert" Questions

...i am stranded CAN you turn the steering wheel if not then you have a lock up on the steering so when turning the wheel both ways backwards and forwards slightly and unlock the ign at the same

...Steering wheel is locked Try this pull the steering wheel as far to the left as possible and while it is in this position try to insert key. Sometimes the steering wheel lock will get in a bind and ...

...steering wheel by lifting off the center cover, disconnecting the horn wire and removing the retaining nut and washer. Make a mark on the steering wheel spline and the wheel itself so you can line it ...

...slightly after inserting the key and before turning the key. This is the method used for turning the key whenever the steering has locked. Man, I just love those forums and i LOVE the

steering wheel with key in ignition try to turn key while wiggleing steering wheel left to right,the steering wheel may be applying force to switch and this will release tension off the switch, I have

...steering wheel. As necessary, remove all under dash panels in order to gain access to the ignition switch. As necessary, lower the steering column to gain working clearance. Disconnect the ignition ...

...steering wheel is centered and the vehicle is positioned on a level surface. 2. Disconnect the negative battery cable. 3. Insert ignition key into the ignition lock cylinder and attempt to rotate the ...

...wheel back and forth to attempt to find a free spot where in which the key turns. The steering column lock can be in a bind and exert pressure against the ignition mechanism. 2. If your car has an ...

steering wheel shaft so it can't be removed. It is purely the part that talks to the chip in the key. https://www.ebay.com/itm/Anti-Theft-Control-Module-T551MK-for-Cadillac-CTS-SRX-2007-2005-2004-2003

...steering wheel column apart to get to ignition lock system? Currently, I am unable to turn on the car as the steering wheel is in a locked position and no action occurs when I insert the key and ...