2002 GMC Sonoma Extended Cab "feul pump relays" Questions

...is not shown when lever is moved. is this a gauge cluster or an ignition switch problem? do not hear the feul pump enguaging w/ ignition on. it is a 4.3 liter auto 2wd vehicle Check the

...feul pump and feul filter. When you turn the ignition to the on position you do not hear the feul pump engage and there is no feul pressure at the filter. I checked the feul pump fuse it is good was ...

...feul pump relay located on 1992 s10? starter wire rubbed aginst engine block and feul pump wont get power to grey wire that runs feul pump .Where is the fusible link that if bad will keep feul pump ...

...not getting any electricity coming to the feul pump.all feul pump is ok. Check this 3 items in this order efi fuse, efi, relay, circuit open relay.all of them in the engine compartment's fuse

...feul pump and have very little feull comeing out the rail i replaced the relay due to not hearing the hum sound and replaced the feul filter and the fuse for the feul pump and nothing helped i know ...

feul pump fuse, I have checked the feul pump relay and it opens/closes but no power in the fuse block under the dash for feul pump, checked the wiring behind the fuse its all connected. Any ideas what

Feul pump stopped working. I changed the relay, it workred for a few hours then stopped again. I changed the feul pump, again it didn't work. Before, I was able to hear the feul pump now there is ...

feul pump won't run (new feul relay and feul pump) My 88 ramvan did the same thing and it was the pickup sensor in the distributor. I replaced it and everything was fine. If the sensor is bad it won't

Is not getting any fire to the feul pump,I have an new feul pump and main relay. check the ground wires to main relay also check main fuses

...pump turns on and the gas is getting to the fuel rails near the feul pressure sensor. Check to see if you have compression on all cylinders. If you don't, replace the timing chain/belt. If you do ...