2008 Mercury Milan "changing solenoid jeep" Questions

Ad

...Jeep Grand Cherokee Overland P0758 code Solenoid B electrical. Im not even sure where to start trying to fix this check for low transmission fluid level.make fluid and filter not dirty has been ...

Ad

...Jeep ran fine for three weeks on new Fluid then threw code p0753. Sounds like I need to change a solenoid just do not know which one. This is a rebuilt with 63k on it. Sounds like a shift solenoid. ...

Ad

Question about Mercury Milan

2 Answers

...Jeep Grand Cherokee with code P0753 and at the transsmission shop told me to replace the governers and change oil and filter and willl be fixed, Now i'm $100 dlls poor with the same problem code. it ...

jeep liberty. code po750 and po700. were is the shift solenoid at and how to change wont shift out of first. throws bad shift soleniod A as a code The Shift Solenoids are inside the PAN, make sure you

Question about Mercury Milan

1 Answer

...solenoid. But first check your fuses and make sure that you don't have something easy to replace. Good luck! At least you didn't have to change your engine - after going through changing the ...

...solenoid is probably okay. Sounds more like a fuel delivery problem. this sounds like a fuel problem.try changing the fuel filter and check the fuel pressure to se if it falls within the manufactures ...

...jeep grand cherokee? If you have the 4.0 engine the "shift solenoid" is for overdrive and also one for tcc ingagement.There is however a govenor pressure solenoid and sensor that will affect ...

...think what's problem? And how much cost new PCM? i have this same problem with my jeep. i am going to change the shift solenoid out. here is your codes, Jeep Grand Cherokee WJ Diagnostic Trouble ...

...packing the gears on its own it seems its in one gear its not changing itself like beforeu put it in drive and it goes forward but it doesnt change itself Possibly bad shift solenoid in

Question about Mercury Milan

1 Answer

...jeep goes up to 30 mph while in neutral What you need to do is drain all the oil in the gearbox of transmission.Replace with a NEW solenoid kit and put in NEW transmission oil. Recycle the old oil at ...

Not finding what you are looking for?
Cars & Trucks Logo

199 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mercury Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...